Laptop-genvejstaster virker ikke på Windows 11? Sådan rettes og hvorfor sker dette

Laptop-genvejstaster er vigtige værktøjer, når du forsøger at få adgang til grundlæggende funktioner på din enhed. De giver dig mulighed for at styre din lydstyrke, justere lysstyrken , tastaturets baggrundsbelysning, touchpad-adfærd og meget mere. Afhængigt af din enhed kan du have yderligere genvejstaster til dedikerede funktioner som at aktivere n-tastskift, deaktivere din touchpad, deaktivere tastaturet , aktivere flytilstand, ændre strømtilstande og meget mere.

Men din bærbare computer kan ende med at miste sin funktionalitet og effektivitet, hvis dine genvejstaster holder op med at virke. Dette ville tvinge dig til at ændre/redigere hver indstilling ved hjælp af deres dedikerede muligheder i Windows Settings-appen, hvilket kan være ret besværligt. Hvis genvejstaster til bærbare computere ikke virker på din bærbare computer, kan du bruge nedenstående metoder til at rette dine genvejstaster. 

Relateret: Sådan flyttes proceslinjen til toppen i Windows 11

Indhold

• Hvorfor virker genvejstaster ikke?
• Sådan repareres genvejstaster på Windows 11 bærbare computere
  • Metode #1: Se efter OEM-opdateringer
  • Metode #2: Sørg for, at OEM-værktøjer fungerer korrekt
  • Metode #3: Opdater drivere
  • Metode #4: Geninstaller tastaturdrivere
  • Metode #5: Deaktiver spiltilstand
  • Metode #6: Genstart HID-tjenesten
  • Metode #7: Deaktiver filternøgler
  • Metode #8: Deaktiver funktionslås (Fn), hvis tilgængelig
  • Metode #9: Tjek skærmtastaturet
  • Metode #10: Brug Windows fejlfinding
  • Metode #11: Kør SFC-scanning
  • Metode #12: Kør DISM-rettelser for at gendanne Windows-image
  • Metode #13: Afinstaller eventuelle tredjepartsværktøjer
  • Metode #14: Tilslut til en anden USB-port (kun eksterne tastaturer)
  • Metode #15: Tjek GPO og genaktiver genvejstaster, hvis de er deaktiveret
• Ret genvejstaster for Asus-brugere
  • Metode #1: Prøv at starte AsusHotkeyExec.exe manuelt
  • Metode #2: Geninstaller Asus System Interface og Armory Crate service
• Ret genvejstaster for Lenovo-brugere
  • Metode #1: Deaktiver alle genveje og forbedringer
  • Metode #2: Opdater dine drivere ved hjælp af Lenovo-support
• Ret genvejstaster for Acer-brugere
• Står du over for fejlkoder, når du genstarter HID-tjenester? Prøv disse rettelser!
  • Metode #1: For fejlkode 126
  • Metode #2: For fejlkode 2

Hvorfor virker genvejstaster ikke?

Genvejstaster på din bærbare computer kan holde op med at virke af flere årsager, men da Windows 11 er ret nyt, ser den mest almindelige årsag ud til at være driverkonflikter og OEM-hjælpekonflikter i baggrunden. Dette skyldes, at de fleste drivere, der i øjeblikket udgives af OEM'er, er designet til Windows 10. Windows 11 introducerer flere forskellige ændringer i baggrunden og den måde, drivere håndteres på, hvilket ser ud til at bryde funktionaliteten for genvejstaster på mange forskellige enheder.

De mest berørte enheder ser ud til at være fra Asus og Lenovo på grund af deres dedikerede hjælpeprogrammer som Armory Crate Service, der skal opdateres til Windows 11. Dette betyder ikke, at andre producenter er undtaget fra dette problem, mange Dell- og Acer-enheder ser også ud til at mister deres genvejstastfunktionalitet med Windows 11.

Hvis du ejer nogen af ​​disse enheder, eller hvis din bærbare computers genvejstaster ikke fungerer generelt på Windows 11, kan du bruge metoderne nedenfor til at prøve at løse dit problem. Lad os komme igang. 

Relateret: Sådan oprettes et gendannelsespunkt i Windows 11

Sådan repareres genvejstaster på Windows 11 bærbare computere

Du kan bruge følgende metoder til at prøve at få genvejstaster til at fungere på din bærbare computer igen. Metoderne er blevet listet i rækkefølge efter deres prioritet, og de mest almindelige rettelser er blevet listet øverst. Du kan starte med den første rettelse og arbejde dig igennem listen for at prøve at finde den rettelse, der fungerer for dit system. Lad os komme igang.

Metode #1: Se efter OEM-opdateringer

Hvis du har et dedikeret tastaturværktøj, der administrerer dine genvejstaster i baggrunden, såsom Armory Crate Service eller Synaptics-værktøjet, så kan du prøve at opdatere dine drivere fra din OEM's hjemmeside. Disse hjælpeprogrammer er forskellige fra specifikke tastaturdrivere, og de kører tjenester og opgaver i baggrunden, der hjælper med at aktivere genvejstaster på din bærbare computer.

Hvis et af disse hjælpeprogrammer er i stykker eller ikke virker, anbefaler vi, at du tjekker efter de seneste opdateringer eller geninstallerer den aktuelle version på din bærbare computer. Brug nedenstående links til at besøge supportwebstedet for din OEM og se efter de seneste hjælpeopdateringer. Når de er fundet, skal du klikke og downloade dem til dit lokale lager og tidligst installere dem på din bærbare computer.

Når de er installeret, bør genvejstaster begynde at arbejde på din bærbare computer igen. Vi anbefaler, at du genstarter din bærbare computer for at undgå konflikter med tidligere installerede versioner i baggrunden. Hvis dine genvejstaster stadig ikke virker, kan du bruge vejledningen nedenfor til at nulstille og opdatere dine OEM-værktøjer på din bærbare computer. 

• MyAsus | Download link
• Lenovo Companion app | Download link
• Lenovo System Update app | Download link
• MSI | Downloadlink (til alle apps)
• Acer Care Center | Download link
• Gigabyte App Center | Download link

Relateret: Sådan repareres Windows 11

Metode #2: Sørg for, at OEM-værktøjer fungerer korrekt

Hvis dine OEM-værktøjer tilsyneladende ikke fungerer i baggrunden, er her et par fejlfindingsmetoder til at genoprette deres funktionalitet. Lad os komme igang.

Tryk Windows + ipå dit tastatur og klik på 'Apps' til venstre. 

Klik på 'Apps og funktioner'.

Find den pågældende app på denne liste, og klik på menuikonet '3 prikker' ved siden af ​​den. 

Vælg 'Avancerede muligheder'. 

Følg nu et af afsnittene nedenfor afhængigt af, hvad du ønsker at gøre med den valgte app.  

2.1 Aktiver baggrundsfunktionalitet

Klik på rullemenuen under 'Baggrundsapps-tilladelser' og vælg 'Strømoptimeret' eller 'Altid'. 

'Strømoptimeret' giver appen mulighed for at arbejde i baggrunden afhængigt af din nuværende strømplan. 'Altid' vil på den anden side give appen tilladelse til at forblive aktiv og arbejde i baggrunden, uanset din aktuelt valgte strømplan. 

2.2 Reparer appen

Windows 11 giver dig også mulighed for at reparere din app. Du skal blot rulle til bunden og klikke på 'Afslut' først.

Klik nu på 'Reparer'. 

Vent på, at Windows gør det, når et flueben vises ved siden af ​​muligheden, prøv at starte den pågældende app på din bærbare computer.

Test dine genvejstaster nu, hvis et mindre problem eller konflikt forårsagede, at appen ikke fungerede i baggrunden, skal genvejsfunktionaliteten nu gendannes på din bærbare computer.  

2.3 Nulstil appen

Hvis ovenstående metoder ikke virkede for dig, kan du nulstille OEM-appen. Dette vil nulstille dens data og give dig en frisk start, som om appen lige var installeret på din bærbare computer. Dette skulle hjælpe med at gendanne din genvejstastfunktionalitet i de fleste tilfælde. Husk dog, at dine appdata vil blive nulstillet, hvilket vil tvinge dig til at logge ind på appen igen, hvis det er relevant. Derudover vil alle ændringer eller tilpasninger, du har foretaget i appen, også blive nulstillet. Følg nedenstående trin for at komme i gang. 

Klik på 'Afslut' for at lukke appen. 

Klik nu på 'Nulstil'. 

Klik på 'Nulstil' igen for at bekræfte dit valg. 

Appen vil nu blive nulstillet på din bærbare computer. Vi anbefaler, at du genstarter din bærbare computer for en god ordens skyld og prøver at bruge dine genvejstaster igen. Hvis appen ikke fungerede korrekt på Windows 11, skulle din genvejstastfunktionalitet nu være gendannet på din bærbare computer.

Metode #3: Opdater drivere

En anden årsag til, at dit tastatur ikke fungerer, ville være forældede drivere. Hvis du ikke har opdateret dine tastaturdrivere tidligere, er det sandsynligvis årsagen til, at dine tastaturgenvejstaster ikke virker i Windows 11. Windows 11 administrerer og installerer dine drivere anderledes, og i nogle tilfælde er Windows 11 kendt for at udskift din OEM-tastaturdriver til fordel for en generisk driver, hvis det er den nyeste.

Hvis genvejstaster stadig ikke virker for dig, anbefaler vi, at du opdaterer dine drivere og installerer de nyeste tastaturdrivere, der er tilgængelige fra din OEM. Du skal blot besøge dit OEM-websted ved at bruge et af nedenstående links og downloade den respektive driver til dit lokale lager.

Når den er downloadet, skal du installere driveren og genstarte din bærbare computer. Afvis alle tastaturdriveropdateringer, der tilbydes af Windows 11, og dine genvejstaster skulle begynde at virke igen. Brug nedenstående links til at komme i gang.

• Asus support
• Acer Support
• Dell Support
• Razer Support
• MSI support
• Lenovo support
• LG support
• Microsoft support
• Samsung support
• Sony support
• Toshiba support
• HP support
• Gigabyte support

Hvis dine tastaturdrivere stadig er forældede, og genvejstaster ikke virker, kan det være på tide at søge efter driveropdateringer via Windows. Din OEM leverer sandsynligvis de seneste driveropdateringer til dig via Windows-opdateringer. Se efter opdateringer til tastaturdrivere i Windows-opdateringer på din bærbare computer ved hjælp af vejledningen nedenfor. Vi vil først sikre os, at din bærbare computer modtager driveropdateringer via Windows Update. Følg guiden nedenfor for at komme i gang. 

Tryk Windows + Spå dit tastatur og søg efter 'Skift enhedsinstallationsindstillinger'. Klik og start appen, når den vises i dine søgeresultater. 

Vælg 'Ja (anbefales)'. 

Klik på 'Gem ændringer'. 

Vent på, at Windows aktiverer driveropdateringer til din bærbare computer. Når det er aktiveret, luk vinduet med installationsindstillinger for enheden, og tryk Windows + ipå på dit tastatur. Vælg 'Windows Update' fra venstre side. 

Klik på 'Kontroller opdateringer' øverst og installer eventuelle opdateringer, der dukker op. 

Når det er installeret, skal du klikke på 'Avancerede indstillinger' nederst. 

Klik nu på 'Valgfrie opdateringer'. 

Klik og udvid 'Driveropdateringer (n)', hvor n repræsenterer det aktuelle antal driveropdateringer, der er tilgængelige for din bærbare computer. Marker afkrydsningsfeltet for eventuelle tastaturdrivere, der vises på denne liste. Klik på 'Download & install' nederst på din skærm. Genstart din bærbare computer for en god ordens skyld, selvom du ikke bliver bedt om det af en Windows-opdatering. 

Og det er det! Dine seneste tastaturdrivere skulle nu være installeret på din bærbare computer, hvilket skulle hjælpe med at genoprette genvejstasterfunktionaliteten for dig. Hvis ikke, kan du fortsætte med rettelserne nedenfor for at prøve at rette dine genvejstaster.

Metode #4: Geninstaller tastaturdrivere

If none of the methods above work for you, then it’s time to reinstall your keyboard drivers. While drivers rarely face conflicts in the background, botched installations, incompatible components, and wrong updates can mess up your keyboard drivers, especially if you have custom RGB backlighting managed by an OEM utility.

Each of these apps uses a different way of hooking into your keyboard backlighting to help customize it according to your needs. These ways to hook into the system don’t play well with other third-party apps managing your keyboard mapping, layout, and more. Reinstalling your keyboard driver can help fix most such issues, and you can do so by either installing a dedicated driver from your OEM or by using a generic driver sourced by Windows. Let’s get started. 

4.1 Reinstall generic keyboard driver

Press Windows + X on your keyboard and click on ‘Device Manager’.

 

Once opened, find your concerned keyboard in the list and right-click on it. If you can’t find your keyboard or have multiple listings, then you can select and uninstall all of them. Once uninstalled, leftover drivers will be removed while the necessary ones will be automatically re-downloaded. 

Click on ‘Uninstall device’.

Click on ‘Uninstall’ again to confirm your choice. 

Restart your laptop if prompted, and repeat the steps above to remove all necessary keyboard drivers installed on your system. Once uninstalled, right-click on an empty area and select ‘Scan for hardware changes’. You can also click on the dedicated icon for the same in your toolbar. 

Windows will now look for generic missing drivers for your native keyboard and reinstall them automatically on your laptop. 

If however, your drivers aren’t found by Windows, then you can use the guide below to manually install the dedicated keyboard drivers from your OEM. 

4.2 Reinstall keyboard drivers manually

Download and install the necessary keyboard drivers to your local storage. Ensure that you extract the file beforehand in case you downloaded an archive. You should find a .inf file inside which is the driver we will be installed manually on your system. Follow the steps below to get you started.

Press Windows + X on your keyboard and select ‘Device Manager’. 

Now expand the ‘Keyboards’ section and right-click on your concerned keyboard. If you have multiple HID devices under ‘Keyboards’ then we recommend you uninstall all unnecessary drivers to avoid conflicts.

Select ‘Uninstall device’. 

Check the box for ‘Attempt to remove the driver for this device’ if the option is available. Click on ‘Uninstall’ to confirm your choice. 

The selected keyboard will now be uninstalled from your system. Your keyboard will stop working after the concerned driver has been uninstalled. This is normal behavior and your keyboard’s functionality should be restored once we reinstall the necessary drivers. Repeat the steps above for all HID devices you wish to remove. Once the necessary devices have been removed, click on the ‘Add drivers’ icon in your toolbar. 

Click on ‘Browse’. 

Navigate to the folder where you have stored your OEM drivers and click on ‘OK’.

Check the box for ‘Include subfolders’ just to be safe. Click on ‘Next’ once you are done.

Windows will now scan the location for compatible drivers and automatically install them on your system. 

Once installed, we recommend you restart your laptop for good measure. 

And that’s it! Your hotkey functionality should now be restored on your system if a background driver conflict was causing issues on your system. 

Note: Do not install any keyboard drivers via Windows Update in the future to avoid losing hotkey functionality again. 

Method #5: Disable gaming mode

Gaming mode within Windows is known to cause issues on certain laptops. Microsoft’s gaming mode has gotten smarter and the mode automatically tries to apply the best peripheral settings for your gaming experience. This includes tweaking your audio, mouse settings, enabling n key rollover on your keyboard, windows key lock, and a lot more.

However, automatically enabling these settings requires hooking into dedicated drivers and tools which are often managed by your OEM. This could create conflicts in the background which might be preventing you from using your hotkeys on Windows 11. Use the guide below to disable gaming mode on your laptop. 

Press Windows + i on your keyboard and click on ‘Personalization’ on your left. 

Click on ‘Device usage’. 

Disable the toggle for ‘Gaming’. 

Click on ‘Gaming’ on your left now. 

Click on ‘Game Mode’ on your right. 

Disable the toggle for ‘Game mode’ at the top of your screen. 

Close the Settings app and restart your laptop.

If your hotkeys start working upon a restart then game mode was likely interfering with your hotkeys in the background.

Method #6: Restart HID service

You can also restart your HID service which should help restart all your HID or Human Interface Devices. This includes your keyboard and restarting the HID service should help fix your hotkeys if your custom software or mapper was unable to hook into the HID service. Use the guide below to get you started. 

Press Windows + S and search for ‘Services’. Click and launch the app once it shows up in your search results. 

Look for ‘Human Interface Device Service’ and right-click on it. 

Select ‘Restart’. 

 

Windows will now restart your HID service.

You can try testing out your hotkeys now. If a conflict in the background was preventing your custom software from hooking into the HID service, then this issue should now be fixed and your hotkey functionality should now be restored. 

Method #7: Disable filter keys

Filter keys are another culprit within Windows that is known to cause issues on many devices. Ideally, Filter keys is an accessibility feature meant to be used so that you can avoid brief repeated key inputs which is quite useful for users with anxiety, hyperactivity, hand tremors, and other similar conditions.

However, if this feature has been enabled by mistake, then it could prevent Windows from detecting your hotkey inputs and combinations. You can check if Filter keys are enabled on your system and disable them using the guide below. 

Press Windows + S and search for Control Panel. Click and launch the app once it shows up in your search results. 

Switch to ‘Large icons’ by clicking on the drop-down menu in the top right corner. 

Click on ‘Ease of Access Center’. 

Click on ‘Make the keyboard easier to use’. 

Now uncheck the box for ‘Turn on filter keys’. 

Click on ‘Ok’ at the bottom. 

And that’s it! Filter keys should now be disabled on your system. Check your hotkey combinations and their functionality should now be restored on your system.

Method #8: Disable Function (Fn) lock if available

Fn lock is a feature in most laptops that allows you to lock and use the Fn keys and their functionality. Most systems use Fn keys as alternate keys mapped to functions and utilities that will be needed to manage your system. For example, F7 could be used to increase brightness and F8 could be used to decrease brightness. If directly pressing these keys helps you manage your brightness then the Fn lock is disabled on your laptop.

However, if hitting F7 and F8 registers as the respective key then the Fn lock is enabled on your device. In such cases, your Fn keys will behave normally and you will need to use Fn + F7 or F8 combination to adjust your brightness. You can disable or toggle this lock using keyboard shortcuts on most laptops. Look for an ‘Fn Lock’ icon on one of your keys and pres Fn + the respective key, on your keyboard. This should help disable Fn lock on your keyboard if enabled, and restore your hotkeys functionality.

In case a key combination is not available on your device, then you will most likely need to access your BIOS. Most manufacturers allow you to disable and enable Fn lock from the BIOS for easy access. Simply press F2 on your splash screen once your laptop is booting to enter the BIOS menu. Once in the BIOS menu, find the relevant option and toggle the Fn lock for your laptop.

In case a BIOS menu option is also not available to you then your laptop most likely uses the default Fn lock combination which is ‘Fn + Esc’ on your keyboard. This will help toggle the Fn lock on your system which should help restore your hotkeys. 

Method #9: Check the on-screen keyboard

On-Screen keyboard within Windows can help you determine if your hotkeys have actually stopped working or you are facing a software issue. Start by launching the on-screen keyboard on your laptop using the taskbar icon. If the icon is hidden, press Windows + S on your keyboard and search for ‘On-Screen Keyboard’. Click and launch the app from your search results. 

Now try using a hotkey that does not use Fn keys on your keyboard as they would be unavailable on your on-screen keyboard. If not try testing out each key and see if it still works on your laptop. 

If all your keys seem to be registering with hotkeys working via the on-screen keyboard, then this indicates a hardware issue with your keyboard. In such cases, we recommend you get in touch with your OEM support team and try to solve your issue. If however, you are unable to activate your hotkeys via the on-screen keyboard as well, then you can use the fixes below to try and solve your issue. 

Method #10: Use Windows troubleshooter

If hotkeys still fail to work on your system then it’s time to run a dedicated Windows troubleshooter. Windows troubleshooters have become highly advanced in the past few years and they can help fix most issues with your system nowadays. Use the guide below to run a keyboard troubleshooter on Windows 11. 

Press Windows + i on your keyboard and click on ‘Troubleshoot’ on your right. 

Now click on ‘Other troubleshooters’. 

Scroll down and click on ‘Run’ beside ‘Keyboard’. 

Windows troubleshooter will now do its thing and try to find issues with your keyboard.

If any are found, follow the on-screen instructions to apply the relevant fixes. However, if the troubleshooter does not find anything then you can use the methods below to try and get your hotkeys working again. 

Method #11: Run SFC scan

If hotkeys still aren’t working on your laptop then this might indicate an issue with your Windows installation. Let’s try to fix Windows system files and Windows 11 image on your laptop to try and fix hotkeys on your system. Use the guide below to get you started. 

Press Windows + S on your keyboard and search for ‘CMD’. Click on ‘Run as administrator’ once it shows up in your search results. 

Now type in the following command and press Enter on your keyboard to execute it. 

sfc /scannow

Windows will now scan and verify all of your system files and replace corrupted ones with fresh system files. If a corrupted Windows 11 installation broke your hotkeys functionality, then this should help fix it on your laptop.

Method #12: Run DISM fixes to restore Windows image

If you got the following message after running the SFC scan above, then it is highly important to run the DISM commands to fix your Windows 11 image. 

“Windows Resource Protection found corrupt files but was unable to fix some (or all) of them”

Additionally, if the SFC scan is completed successfully but your hotkeys still do not work, then you can use the DISM commands to try and fix your Windows image as well. This will restore system files and solve background conflicts that might be preventing you from using your hotkeys. Follow the steps below to get you started. 

Press Windows + S on your keyboard, search for CMD and click on ‘Run as administrator’ once it shows up in your search results. 

Type in the following command and press Enter on your keyboard to execute it. 

DISM /Online /Cleanup-Image /RestoreHealth

Wait for the process to complete and restart your laptop for good measure. 

If a corrupted Windows image was the cause of your issue, then hotkey functionality should now be restored on your laptop.

Method #13: Uninstall any third-party tools

If you have any third-party tools customizing your keyboard then we recommend you disable or uninstall them at once. This includes the likes of key mappers, macro customizers, keyboard backlighting customizers, keyboard layout changes, and more. Such apps use different ways to hook into your keyboard drivers via Windows and any one of these could be outdated and not compatible with Windows 11 on your system.

We recommend you uninstall any such tools from your system at the earliest and remove any additional leftover configuration files if available. You should also check for driver updates to your keyboard and roll back to a previously known driver to revert any major changes applicable to your system. Use the guide below to roll back your keyboard driver. 

13.1 How to rollback your keyboard driver

Press Windows + X on your keyboard and click on ‘Device manager’. 

Find the desired keyboard in your list of devices and right-click on it once found.

 

Select ‘Properties’. 

Click and switch to the Driver tab. 

Click on ‘Rollback driver’ if available. 

Follow the on-screen instructions to finish rolling back your driver. 

Restart your system if prompted. 

Once the driver is reverted to its previous iteration hotkeys should start working on your system again.

However, if you don’t have the option to roll back your driver then you will need to uninstall the installed drivers for your keyboard and hope that Windows sources the correct drivers when it scans for new hardware on your system. If you have dedicated drivers available for your keyboard on your OEM support site, then you can install them manually. Follow Method #10 below to reinstall your keyboard drivers manually or through Windows in this case.

Method #14: Connect to a different USB port (external keyboards only)

If you are using an external keyboard then we recommend using a different USB port. Depending on your keyboard you might need a USB 2.0 or USB 3.0 port for compatibility and keyboard layout reasons. Additionally, if your keyboard uses fancy backlighting and other custom features then it likely requires a USB 3.0 port on your system to power all of its features.

In contrast, if you are trying to use a legacy keyboard via adapters then you will likely need to test USB 2.0 and USB 1.2 for best performance depending on your unit. Moreover, we recommend you ensure that your laptop is plugged into power so that it can power your USB ports properly. 

If however, your external keyboard still fails to work then you can try reinstalling its drivers on your system using the guide in this post. 

Method #15: Check GPO and re-enable hotkeys if disabled

If you are using Windows Pro or higher that has been issued by your organization or your educational institute then it is likely that hotkeys have been disabled on your system by your administrator. This could be a side effect due to a recent change, or it could be your new company policy.

Administrators tend to disable third-party apps on company-issued and education systems which also, in turn, disables hotkey functionality for most laptops. You can fix this issue by contacting your administrator and whitelisting your hotkey app in case you don’t have access to the Group Policy Editor. However,

If you are an administrator, with access to GPO, then you can use the guide below to re-enable hotkeys on your system. 

Press Windows + R on your keyboard, type in the following term, and press Enter on your keyboard. 

gpedit.msc

Navigate to the following path.

User Configuration > Administrative Templates > Windows Components > File Explorer

Double click on ‘Turn off Windows Key hotkeys’.

Click and select ‘Enabled’ in the top left. Then click ‘Apply’ in the bottom right and then click ‘OK’.

Restart your laptop for good measure and hotkey functionality will now be restored on your system. Please keep in mind that this will only work for OEMs that hook into Windows shortcuts natively to get hotkeys working again. For manufacturers that have dedicated utilities, you can use one of the guides below.

Fix hotkeys for Asus Users

If you are an Asus user with a ROG or a TUF unit, then it is likely that you are dealing with Armoury Crate. Armoury Crate is Asus’s utility that helps you manage your power plan, performance plan, overclocking, keyboard backlighting, and more depending on your laptop. Over the years Armoury Crate has grown to be quite finicky and has been riddled with telemetry and adware.

Moreover, the Aura Sync utility seems to be a hit or miss when syncing your peripherals’ backlighting with each other. If you have an Asus unit and hotkeys don’t seem to be working for you then it is likely that the Asus hotkeys app hasn’t been launching in the background. In this case, you can either try to manually start the app or reinstall AC service and the Asus System interface reconfigure your hotkeys and restore their functionality. Use one of the guides below that best fits your current needs and requirements. 

Method #1: Try to manually start AsusHotkeyExec.exe

Press Ctrl + Shift + Esc on your system to open the Task Manager and switch to the ‘Details’ tab. 

Depending on your preferences, the install location of AsusHotKeyExec.exe could vary. Hence we will use an already running process to find its install location. Start by right-clicking on either of the following ongoing tasks. 

• AsusOptimization.exe
• AsusOptimizationStartupTask.exe

Select ‘Open file location’. 

You should now be taken to the ‘C:\Windows\System32’ ideally, where you should find the ‘AsusHotkeyExec.exe’. Right-click on the app and select ‘Run as administrator’.

The app will now launch in the background and restore hotkey functionality on your system.

Try using one of your hotkeys now, if it seems to be working then, likely, AsusHotkeyExec.exe did not automatically launch in the background. This could be an isolated incident but if the app fails to launch even after a restart, then you will need to re-enable its auto start functionality.

You can do this by reinstalling Asus System Interface and Armoury Crate Service on your laptop using the guide below.  

Method #2: Re-install Asus System Interface and Armoury Crate service

Asus System Control Interface is a prominent utility regularly updated by Asus that helps most tools like Armoury Crate, Armoury Crate Service, MyAsus System Diagnosis, and more to run properly on your system. Armoury Crate service on the other hand is your overclocking utility bundled with specific overclocking and power management configurations for your specific device. Depending on your ROG or TUF unit, AsusHotkeyExec.exe could be bundled with either of these services. Let’s re-install both of them on your system.  

• Asus Support | Link

Visit the link above and click on ‘Laptops’.

Click on ‘Product Series’ and select your Series from the drop-down menu. 

Click on the next drop-down menu and select your laptop from the list.

If your unit is not listed in this list, then you can search for it using the search bar at the top. Click on your laptop model once it shows up in your search results under ‘Products’. 

Click on ‘Driver & Utility’. 

Choose ‘Windows 10 64-bit’ as your OS. 

Now scroll down to the ‘Software and Utility’ section and click on ‘Show all’. 

Click on ‘Download’ beside the latest version of ASUS System Control Interface. 

Similarly, click on ‘Download’ beside Armoury Crate Service. 

Note: Asus has now started bundling the Armoury Crate app, Armoury Crate Service, Aura Sync app, and Aura Sync service in a single package for many laptops. If this is the case for your unit as well, then you can download this package. 

Now let’s remove all installed services and packages that we are going to reinstall. Press Windows + i on your keyboard and click on ‘Apps’ on your left. 

Click on ‘Apps and features’. 

Now uninstall the following applications if you managed to source the Armoury Crate Service package from the download page. 

• Armoury Crate Service
• Armoury Crate Service core

However, if you got a single package to install Armoury Crate, Armoury Crate Service, Aura Sync app, and Aura Sync service, then uninstall the following applications from your laptop. 

• Armoury Crate
• Armoury Crate Service
• Armoury Crate Service core
• Aura Sync add-on x32
• Aura Sync add-on x64
• Game Visual or Asus Splendid
• Aura Sync

To uninstall an app, click on the 3-dot menu beside it and select ‘Uninstall’. Click on ‘Uninstall’ again to confirm your choice. Repeat the steps above to uninstall all the necessary apps from your system. 

Note: Do not remove services like Refresh Rate service, Pointing device service, and more from your laptop during this process. Even though they hook into the Armoury crate, there is no need to uninstall them as the existing installation will work with your reinstalled Armoury Crate and its services.

We will now uninstall Asus System Control Interface from your system. The best way to do this is by using the Device Manager. Follow the guide below to get you started. 

Press Windows + X on your keyboard instead and select ‘Device Manager’. 

Click and expand ‘System devices’ in Device Manager. 

Right-click on ‘Asus System Control Interface’ and select ‘Uninstall device’.

Click on ‘Uninstall’ to confirm your choice. Additionally, check the box for ‘Attempt to remove the driver for this device’ if available. 

If Asus System Control Interface is unavailable in your device manager then you can restart your laptop at this point. Once restarted, follow the subsequent steps to re-install Armoury Crate and Asus System Control Interface on your system. The concerned drivers will now be uninstalled from your system. You can now restart your laptop for the changes to take effect. 

Once your laptop restarts, navigate to the packages we downloaded from Asus’s website on your local storage and start by installing Asus System Control Interface first. Double-click and launch the .exe file and follow the on-screen instructions to install Asus System Control Interface on your laptop. You will be prompted to restart your system once the process completes. We recommend you restart your system at this point before proceeding with the installation of Armoury Crate on your system. 

Once your system restarts, double click and launch the Armoury Crate package.

Select the utilities you wish to install on your system. Unless you have other Asus peripherals that support RGB backlighting through Aura Sync, there is no point in installing Aura Sync. Once you have selected the desired utilities, click on ‘Next’. 

Click on ‘Install’ to start the installation process. 

The package will now connect to Asus’s servers, identify your laptop and install the necessary compatible utilities. Once installed, we recommend you restart your system for good measure. 

And that’s it! Once your system restarts, hotkeys should be back up and running again on your system. 

Fix hotkeys for Lenovo users

If you own a Lenovo unit especially from the ThinkPad or IdeaPad series, then you will need to try out the following fixes. Lenovo’s professional lineup of laptops is bundled with tons of hotkeys and there are mainly 3 fixes you can try to fix your issue. Let’s first verify if your hotkeys have actually stopped working. Follow the steps below to get you started. 

Method #1: Disable all shortcuts and enhancements

Let’s start by disabling all keyboard shortcuts and keyboard enhancements within Windows for your laptop’s keyboard. Follow the guide below to get you started. 

Press Windows + S on your keyboard and search for ‘Control Panel’. Click and launch the app from your search results. 

Click on the drop-down menu in the top right corner and select ‘Large icons’. 

Click on ‘Ease of access center’. 

Click on ‘Make the keyboard easier to use’. 

Uncheck all the options available on your screen. 

Save your changes and restart your laptop for good measure. 

If keyboard enhancements enabled by Windows were causing conflicts with your hotkeys, then your hotkey functionality should be restored on your laptop by now. 

Method #2: Update your drivers using Lenovo support

You might have manually updated your drivers, you might have reinstalled and rolled back your drivers, but this isn’t similar to downloading and installing drivers through the support app. Most OEM support apps are designed to automatically scan for known issues with your hardware in the background and fix them automatically. These support app also come with hotfixes and patches that aren’t readily available to the end consumer. These hotfixes and patches are applied when downloading and installing the concerned driver or utility,

Hence we recommend that you download and reinstall the following drivers on your system through the Lenovo support app. Depending on your unit’s make and model, you could be using a different Lenovo app like Lenovo Vantage and more. The process is similar for all these apps and you simply need to manually uninstall your keyboard drivers first and then reinstall the corresponding ones from your support app. 

Note: We won’t be removing your power management drivers and instead we will be simply reinstalling them. Removing power management drivers can end up harming your vital components especially if your laptop is doing some resource-heavy work in the background. 

Press Windows + X and select ‘Device Manager’. 

Find your keyboard under ‘Keyboards’ and right-click on it. 

Select ‘Uninstall device’. 

Check the box for ‘Attempt to remove the driver for this device’ if available. Click on ‘Uninstall’.

 

Your keyboard driver will now be uninstalled. Open the Lenovo System Update, Lenovo Vantage, or the corresponding Lenovo support app depending on your current laptop. We will be using the Lenovo System update app for this guide as that will be used by most modern systems currently and in the future. If you do not have the app installed on your unit, then you can use the link below to download it to your laptop. 

• Lenovo System Update App | Download Link

Download and install the app on your system using the link above. Once installed, launch the app and log in with your device and account details if prompted. 

Click on ‘Get new updates’ on your left. 

Lenovo System update app will now detect your configuration and look for compatible upgrades accordingly. Once the process completes, all available updates will be shown on your screen according to their priority. Check each of the following sections and check the boxes for the updates you wish to install on your laptop. Your keyboard driver will also show up in this list as it is currently missing from your system. Ensure that you check the box for your keyboard driver before moving to the next step. 

• Critical Updates
• Recommended Updates
• Optional Updates

Note: Do not check the boxes for your bios updates. We recommend you download and install bios updates, individually and separately so that your laptop does not face installation conflicts in the background during this process.

Click on ‘Download’ in the bottom right corner. 

Lenovo system update will now download and install all the selected drivers on your system. Your laptop could automatically restart a few times during this process which is normal. Simply log back into your account and wait until the installation process has been completed. 

Once all the drivers are installed on your system, try using your keyboard hotkeys again. In most cases for Lenovo devices, your hotkeys should be back up and running on your system again. Lenovo is known to apply certain patches in the background when installing hotkey drivers and create certain tasks to maintain the functionality of your hotkeys. A reinstallation should have reinitiated this process again which should have fixed your hotkeys. 

Fix hotkeys for Acer users

If you are using an Acer system then there isn’t much you can do at this point. Acer is known to keep its hotkeys simple with minimal customization available to the end-user. This in turn means that if the above-stated general fixes did not work for you then it is unlikely that resetting the CMOS will. However, if you have overclocked your unit or have been messing around with voltage values, then you can try resetting your CMOS to get hotkeys back up and running on your system again.

Resetting the CMOS does a lot of things but it mainly helps reset changes to core system values like your voltage, frequency speed, and more. Resetting the CMOS also helps discharge capacitors on some laptops which can give you a sudo-fresh start which is known to solve many persistent errors and issues with systems in the past. Use this comprehensive guide by us to reset your CMOS on your Acer unit.

Check out: How to Reset BIOS in Windows 11

Facing error codes when restarting HID services? Try these fixes!

If you decided to restart your HID service using the guide at the top, then you could end up facing two common errors depending on how your system has been configured. These are known errors and can be fixed on your system using the guides below. Follow the steps to get you started. 

Method #1: For error code 126

Error code 126 can be fixed by replacing the Hidserv.dll to your system 32 folder. Follow the guide below to get you started.

Note: You will need a Windows 11 installation media or ISO in case the .dll file is unavailable on your system. Make sure you have either of these handy before proceeding with the guide below. In case you do not have an installation media handy, then you can use the link below to download Hidserv.dll to your local storage. 

• Hidserv.dll | Download Link

Open the Windows installation media you have handy and search for Hidserv.dll using the search box in your top right corner. 

Once found, copy the file to a convenient location on your local storage. If however, you downloaded the file to your local storage using the link above, then extract the archive to a convenient location and follow the steps below to edit its security permissions. 

Right-click on the downloaded Hidserv.dll and select ‘Properties’. 

We will now need to manually grant permissions to the necessary users and applications so that Hidserv.dll can work properly on your system. Switch to the Security tab at the top. 

Click on ‘Edit’ at the top. 

Click on ‘System’ at the top and check the box for ‘Write’

Click on ‘Apply’ once done. Select ‘Yes’ to confirm your choice. Repeat the steps above and restrict permissions for Administrators and other users in the list above. Once you are done, click on ‘Add’. 

Now enter the following term and press Enter on your keyboard. 

All Application Packages

Select the following permissions for ‘ALL APPLICATION PACKAGES’. 

• Read & execute
• Read

Similarly, click on ‘Add’ again. 

Now enter the following term and click on ‘Ok’. 

NT Service\TrustedInstaller

Check the boxes for the same permissions as we did for the application packages above. 

We now need to add permissions for restricted UMP packages on your system. There is no way to do this using the Windows File Explorer, so we will be using a PowerShell script instead. Press Windows + S on your keyboard and search for PowerShell. Click on ‘Run as administrator’ once it shows up in your search results. 

Once PowerShell launches, copy and paste the code below in your PowerShell window. Do not execute the commands just yet.

 

$user = [Security.Principal.NTAccount]::new("ALL RESTRICTED APPLICATION PACKAGES").Translate([System.Security.Principal.SecurityIdentifier])
$rule = [Security.AccessControl.FileSystemAccessRule]::new($user, "ReadAndExecute", "Allow")
$directory = PATH
$acl = Get-Acl $directory
$acl.SetAccessRule($rule)
Set-Acl -Path $directory -AclObject $acl

Now navigate to the Hidserv.dll file that we just edited the permissions for and right-click on it. Select ‘Copy as path’.

Go back to your PowerShell window and replace “PATH” with the path we just copied. 

Once replaced, hit Enter on your keyboard to execute the command. Once completed, the new permissions for restricted application packages should now be added to your new Hidserv.dll file. 

Note: If you are typing in the path manually then you will need to include in double-quotes as shown in the final screenshot. Pasting a copied path using the method above will automatically add double quotes to it. 

It’s now time to replace or add the file to your boot directory. Navigate to the Hidserv.dll file we just created and copy it to your clipboard. 

Press Windows + E on your keyboard and navigate to the following path. 

C:\Windows\System32

Paste your file in this location. Click on ‘Replace the file in the destination’.

 

Click on ‘Yes’ to grant the necessary administrator permissions. Once the file is replaced, restart your system for good measure. You can now check your HID services in the Services app to see if it is back up and running again. If not, you can try starting it manually, and you should no longer be facing Error code 126 on your system. 

Method #2: For Error code 2

If you are getting Error code 2 after trying to restart the HID service then there could be a couple of reasons why you are facing this error. The main reason is due to unwanted registry changes for the HID service. This could have happened due to recently applied manual hacks or registry cleaners used by you. We will need to check for these changes and revert them if any have been made on your system. Follow the guide below to get you started. 

Press Windows + R on your keyboard, type in the following term, and hit Enter on your keyboard. 

regedit

Navigate to the following registry key. You can also copy-paste the same in the address bar at the top of your screen. 

Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\hidserv

Double click on the ‘Type’ value on your right. 

Set the value to ’20’ if it is something different and click on ‘Ok’. 

Now click on ‘Parameters’ under Hidserv on your left. 

Double click on ServiceDll on your right. 

Enter the following path in its Value data field. Even if the same path exists, copy-paste the one below just to be sure. Ensure that there are no spaces at the starting or end of the path below. 

%SystemRoot%\System32\hidserv.dll

Once done, repeat the steps above for the following registry locations given below. 

• Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hidserv

Additionally, if folders named ControlSet002 or more exist in the location below, then we recommend repeating the steps above for the Hidserv folder in those locations as well. 

• Computer\HKEY_LOCAL_MACHINE\SYSTEM\

Once you have made these changes, restart your system, and HID service should be automatically working on your laptop again. If not, launch the service manually and you should no longer face Error code 2 on your laptop. 

Laptop hotkeys can be quite finicky and we hope you were able to get the back up and running again on your system using the guides above. If you face any issues or have any questions for us, feel free to reach out using the comments section below. 

Related: 

• How to Tell If Your Computer is 32 or 64 Bit on Windows 11
• How to Disable Updates on Windows 11
• How to Change the Taskbar Color on Windows 11
• How to Disable Windows Search on Windows 11
• How to Search in Windows 11: Everything You Need to Know
• How to Unzip Files on Windows 11
• How to Install Fonts on Windows 11
• How to Stop Pop Ups on Windows 11
• How to delete temporary files in Windows 11