Introduction
Preliminary Steps
Configure OpenSMTPD
Configure Dovecot IMAP
Set up Rspamd
(Optional) Configure RainLoop Webmail
Introduction
This tutorial demonstrates a full-featured email server running on OpenBSD using OpenSMTPD, Dovecot, Rspamd, and RainLoop. OpenSMTPD is the default mail server for OpenBSD. Choose a Vultr Compute Cloud instance with plenty of storage for the expected number of users.
Preliminary Steps
Set up your user account to perform tasks as root.
su -
usermod -G wheel <username>
echo "permit nopass keepenv :wheel" > /etc/doas.conf
exit
Set up the package repository for OpenBSD.
doas su
echo "https://cdn.openbsd.org/pub/OpenBSD" > /etc/installurl
exit
Add the required packages.
doas pkg_add opensmtpd-extras opensmtpd-filter-rspamd dovecot dovecot-pigeonhole rspamd redis
By default, OpenSMTPD only listens on localhost. It must be explicitly configured to listen on external interfaces. It should be configured to use virtual users instead of system users for security.
Backup the default /etc/smtpd.conf
file and create a new one from scratch.
cd /etc/mail
mv smtpd.conf smtpd.conf.default
Create a new smtpd.conf
as shown below. Replace example.com
with your domain. This initial configuration does not activate the rspamd filter while testing OpenSMTP. The spam filter will be activated later.
pki "mail" cert "/etc/ssl/mail.crt"
pki "mail" key "/etc/ssl/private/mail.key"
table aliases file:/etc/mail/aliases
table credentials passwd:/etc/mail/credentials
table virtuals file:/etc/mail/virtuals
filter "rspamd" proc-exec "/usr/local/libexec/smtpd/filter-rspamd"
# To accept external mail, replace with: listen on all
# listen on all tls pki "mail" hostname "mail.example.com"
listen on egress port submission tls-require pki "mail" hostname "mail.example.com" \
auth <credentials>
action "local_mail" mbox alias <aliases>
action "domain_mail" maildir "/var/vmail/example.com/%{dest.user}" \
virtual <virtuals>
action "outbound" relay
# Uncomment the following to accept external mail for domain "example.org"
# match from any for domain "example.com" action "domain_mail"
match from local for local action "local_mail"
match from local for any action "outbound"
match auth from any for any action "outbound"
Create the /etc/credentials File
OpenSMTPD and Dovecot can share an authentication database. This database resembles the system password file in format, with two extra fields for Dovecot. The two special fields define the virtual home directory and the mail location. Passwords are in blowfish format. This tutorial creates three example users.
Generate the passwords and concatenate them to the /etc/mail/credentials
file.
doas su
smtpctl encrypt example_password1 >> /etc/mail/credentials
smtpctl encrypt example_password2 >> /etc/mail/credentials
smtpctl encrypt example_password3 >> /etc/mail/credentials
exit
The output looks similar to this:
$2b$10$agmNBPvFm1zqCjbbZC3JbO4Ns2jJNZQfTS45MAnKi.IPrkKITyTa6
$2b$10$LwkcKVVnwG8hDxu2W4YKD.K0kQ2oylOmQ9SBUb0hIopBsmNxYPb4e
$2b$10$bgLW/GMZyRXKbROgRQIvRu4xbeOqOJJXlgEAKuS5sIrBvfdPvEzeq
Edit /etc/mail/credentials
to add the required fields. Each line maps to a system account, vmail, with UID and GID of 2000. Replace example.com with your domain. The virtual user name is the complete email address.
[email protected]:$2b$10$agmNBPvFm1zqCjbbZC3JbO4Ns2jJNZQfTS45MAnKi.IPrkKITyTa6:vmail:2000:2000:/var/vmail/example.com/john::userdb_mail=maildir:/var/vmail/example.com/john
[email protected]:$2b$10$LwkcKVVnwG8hDxu2W4YKD.K0kQ2oylOmQ9SBUb0hIopBsmNxYPb4e:vmail:2000:2000:/var/vmail/example.com/adam::userdb_mail=maildir:/var/vmail/example.com/adam
[email protected]:$2b$10$bgLW/GMZyRXKbROgRQIvRu4xbeOqOJJXlgEAKuS5sIrBvfdPvEzeq:vmail:2000:2000:/var/vmail/example.com/natalie::userdb_mail=maildir:/var/vmail/example.com/natalie
Create Virtual Mail Account and Set Security
Create the Virtual User Mapping
Create /etc/mail/virtuals
to define the valid email addresses.
Create Public/Private Keys for OpenSMTPD
This example uses a self-signed certificate. Use a valid signed certificate if you have one. When prompted for the common name, be sure it matches the FQDN of the server. This example uses mail.example.com.
doas su
cd /etc/ssl
openssl genrsa -out private/mail.key 4096
openssl req -x509 -new -nodes -key private/mail.key -out mail.crt -days 3650 -sha256
chmod 0400 /etc/ssl/private/mail.key
exit
Test the Server
Use the OpenSMTPD configuration syntax checker. If no problems are found, restart the smtpd daemon.
doas smtpd -n
doas rcctl restart smtpd
From an outside mail account, send a test email to one of the users.
- OpenSMTPD will create the maildir folder structure below
/var/vmail
and deliver the mail to /var/vmail/example.com/<username>/new
.
- As the root user, browse to this location and verifiy you have a file named similar to this:
1576339842.4d64757b.example.com:2,
.
Review the contents of the file, including all of the mail headers, to verify the email delivery works properly.
Return-Path: <n0244e80da3-54b1ed125c5342fc-adam===example.org@bounce.example.org>
Delivered-To: [email protected]
Received: from spruce-goose-ba.twitter.com (spruce-goose-ba.twitter.com [199.59.150.96])
by mail.example.com (OpenSMTPD) with ESMTPS id 75b514d3 (TLSv1.2:ECDHE-RSA-AES256-GCM- SHA384:256:NO)
for <[email protected]>;
Sat, 14 Dec 2019 11:10:40 -0500 (EST)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=twitter.com;
s=dkim-201406; t=1576339839;
bh=jhKB5/w9v87GaXSuizT576ntJ/72gvLRDhsqmGQQrCE=;
h=Date:From:To:Subject:MIME-Version:Content-Type:List-Unsubscribe:
Message-ID;
b=TWn/QVUJ1VDlWiweWoanwHLABCL1nqmm0+TBzh3PjmYNm0quRMXB7QL2ykzHGME5A
DTz/JFHa0cOvQsrdhxxbjOLFKimK0nF+Ou5kI+2HzTzfVNZS0qGnTVP/tZyaIsWjjl
an5EiR6HFOHG4iClOOEOJW4oLDEZfPTefrlW+378bmHGIRUNDvVKrbXKunL9fJFAb3
JSrhWQNwbrF/aARFzw4nKfb1I7vTRSrN1eXE5JxzGwI2XAjqDIWdR5ExwUNbJH5ZPs
wQ85j8KLZEEgQkbH9CypgeUMJWsVK95FqOCCaqKMS10M7intGMb3aeiiFcB7yDHi9t
u7rVESm4eGp/g==
X-MSFBL: DM7pSZns+YDRgNEmGNre9aPjZTtc1tDlN97w5rQDBts=|eyJ1IjoibWF0dEBnb2J
sYWNrY2F0LmNvbUBpaWQjIzU0YjFlZDEyNWM1MzQyZmNiNThiMzVmNzI0NDZlMGF
mQHVzYiMjNkAyNDRAMTA4MjgwNTAxMDYzNzk1MDk3NkAwQDA4MjY5ZWI4OTI3YzR
kNTFiNTZkMjY3YzY2OGRmN2IwY2Y4M2ExZGIiLCJyIjoibWF0dEBnb2JsYWNrY2F
0LmNvbSIsImciOiJCdWxrIiwiYiI6InNtZjEtYmd4LTM0LXNyMS1CdWxrLjE4NiJ
9
Date: Sat, 14 Dec 2019 16:10:39 +0000
...
Set the Login Class
Dovecot requires the ability to have a larger number of files open for reading and writing than the default class allows. Failing to do this will cause errors that are difficult to troubleshoot.
Define a login class for the Dovecot daemon. At the bottom of /etc/login.conf
add the following lines.
dovecot:\
:openfiles-cur=1024:\
:openfiles-max=2048:\
:tc=daemon:
Create the Dovecot Configuration File
Create /etc/dovecot/local.conf
.
auth_mechanisms = plain
first_valid_uid = 2000
first_valid_gid = 2000
mail_location = maildir:/var/vmail/%d/%n
mail_plugin_dir = /usr/local/lib/dovecot
managesieve_notify_capability = mailto
managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve
mbox_write_locks = fcntl
mmap_disable = yes
namespace inbox {
inbox = yes
location =
mailbox Archive {
auto = subscribe
special_use = \Archive
}
mailbox Drafts {
auto = subscribe
special_use = \Drafts
}
mailbox Junk {
auto = subscribe
special_use = \Junk
}
mailbox Sent {
auto = subscribe
special_use = \Sent
}
mailbox Trash {
auto = subscribe
special_use = \Trash
}
prefix =
}
passdb {
args = scheme=CRYPT username_format=%u /etc/mail/credentials
driver = passwd-file
name =
}
plugin {
imapsieve_mailbox1_before = file:/usr/local/lib/dovecot/sieve/report-spam.sieve
imapsieve_mailbox1_causes = COPY
imapsieve_mailbox1_name = Junk
imapsieve_mailbox2_before = file:/usr/local/lib/dovecot/sieve/report-ham.sieve
imapsieve_mailbox2_causes = COPY
imapsieve_mailbox2_from = Junk
imapsieve_mailbox2_name = *
sieve = file:~/sieve;active=~/.dovecot.sieve
sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.environment
sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve
sieve_plugins = sieve_imapsieve sieve_extprograms
}
protocols = imap sieve
service imap-login {
inet_listener imaps {
port = 0
}
}
service managesieve-login {
inet_listener sieve {
port = 4190
}
inet_listener sieve_deprecated {
port = 2000
}
}
ssl_cert = </etc/ssl/mail.crt
ssl_key = </etc/ssl/private/mail.key
userdb {
args = username_format=%u /etc/mail/credentials
driver = passwd-file
name =
}
protocol imap {
mail_plugins = " imap_sieve"
}
Dovecot Bug Fix
There is a bug in Dovecot where the ssl_cert
and ssl_key
settings do not get overridden in the local.conf
file so we have to comment them out. If you miss this step, Dovecot will fail to start correctly.
Edit /etc/dovecot/conf.d/10-ssl.conf
as shown.
...
# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
# dropping root privileges, so keep the key file unreadable by anyone but
# root. Included doc/mkcert.sh can be used to easily generate self-signed
# certificate, just make sure to update the domains in dovecot-openssl.cnf
#ssl_cert = </etc/ssl/dovecotcert.pem
#ssl_key = </etc/ssl/private/dovecot.pem
...
Create the Sieve Scripts
Sieve scripts train Rspamd on spam and ham. Moving email into and out of the junk folder triggers an event to train Rspamd.
These files are located at /usr/local/lib/dovecot/sieve
.
Create the report-ham.sieve
file.
require ["vnd.dovecot.pipe", "copy", "imapsieve", "environment", "variables"];
if environment :matches "imap.mailbox" "*" {
set "mailbox" "${1}";
}
if string "${mailbox}" "Trash" {
stop;
}
if environment :matches "imap.user" "*" {
set "username" "${1}";
}
pipe :copy "sa-learn-ham.sh" [ "${username}" ];
Create the report-spam.sieve
file.
require ["vnd.dovecot.pipe", "copy", "imapsieve", "environment", "variables"];
if environment :matches "imap.user" "*" {
set "username" "${1}";
}
pipe :copy "sa-learn-spam.sh" [ "${username}" ];
Compile the files.
sievec report-ham.sieve
sievec report-spam.sieve
Create the following two shell scripts in /usr/local/lib/dovecot/sieve
Add the following to sa-learn-ham.sh
#!/bin/sh
exec /usr/local/bin/rspamc -d "${1}" learn_ham
Add the following to sa-learn-spam.sh
#!/bin/sh
exec /usr/local/bin/rspamc -d "${1}" learn_spam
Make the files executable.
chmod 0755 sa-learn-ham.sh
chmod 0755 sa-learn-spam.sh
Enable and start Dovecot.
rcctl enable dovecot
rcctl start dovecot
Check that Dovecot started properly.
ps ax | grep dovecot
88005 ?? I 0:00.11 /usr/local/sbin/dovecot
69640 ?? I 0:00.03 dovecot/anvil
91207 ?? I 0:00.03 dovecot/log
98178 ?? I 0:00.19 dovecot/config
34712 ?? I 0:00.06 dovecot/stats
96674 ?? I 0:00.03 dovecot/imap-login
8891 ?? S 0:00.02 dovecot/imap
Verify Dovecot can correctly read /etc/mail/credentials
doveadm user [email protected]
field value
uid 2000
gid 2000
home /var/vmail/example.com/john
mail maildir:/var/vmail/example.com/john
Verify a mail user can log in.
doveadm auth login [email protected]
Password: ********
passdb: [email protected] auth succeeded
extra fields:
[email protected]
userdb extra fields:
[email protected]
mail=maildir:/var/vmail/example.com/john
uid=2000
gid=2000
home=/var/vmail/example.com/john
auth_mech=PLAIN
Set up Rspamd
This is a basic Rspamd configuration, refer to the offical documentation for more details. This example creates a definition for our domain to enable DKIM signing.
Create a public/private keypair in /etc/mail/dkim
and set the correct permissions.
doas su
mkdir /etc/mail/dkim
cd /etc/mail/dkim
openssl genrsa -out private.key 1024
openssl rsa -in private.key -pubout -out public.key
chmod 0440 private.key
chown root:_rspamd private.key
Create a DNS record for DKIM containing the public key. Refer to your DNS provider for details of how to create a DKIM record. Copy the contents from /etc/mail/dkim/public.key
and paste it after the p=
part of the DKIM record as shown below. Note this example also creates an SPF record.
default._domainkey.example.com. IN TXT "v=DKIM1;k=rsa;p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQClcuK3FV3Ug64li8iFsuJ2ykgb7FMZsujk9uG79ppPUp57vCfjzO7F+HBfx5qIwvlGxv2IJXK86FZwhpUX+HFCDUtfB2z0ZNGerWcZfNzM1w1Bru/fdMd2tCYkiHEa5RWIkLfs/Fm+neXxRZfAG2UDWmAghNbgzYv7xViwgufDIQIDAQAB"
example.com. IN TXT "v=spf1 a ip4:192.0.2.1 mx ~all"
Create a DMARC record.
_dmarc.example.com. IN TXT "v=DMARC1;p=none;pct=100;rua=mailto:[email protected]"
Create the /etc/rspamd/local.d/dkim_signing.conf
configuration file.
The selector="default";
line is derived from the first part of the DKIM DNS record (default._domainkey....
) created above.
domain {
example.com {
path = "/etc/mail/dkim/example.com.key";
selector = "default";
}
}
Enable and start Rspamd.
doas rcctl enable redis rspamd
doas rcctl start redis rspamd
Change the lines below in /etc/mail/smtpd.conf
and restart OpenSMTPD to enable Rspamd.
...
listen on all tls pki "mail" hostname "mail.example.com" filter "rspamd"
listen on egress port submission tls-require pki "mail" hostname "mail.example.com" \
auth <credentials> filter "rspamd"
...
rcctl restart smtpd
Test the mail server with POP3 or IMAP email client. If you do not require webmail, stop here.
Install Prerequisite Packages
When prompted, please choose the most current version of PHP.
pkg_add php php-curl php-pdo_sqlite php-zip pecl73-mcrypt zip unzip wget curl
Fetch the RainLoop webmail tarball and extract it to /var/www/htdocs/
.
Use the Standard Edition which includes an automatic updater.
cd /tmp
wget https://www.rainloop.net/repository/webmail/rainloop-latest.zip
unzip rainloop-latest.zip -d /var/www/htdocs/rainloop
chown -R www:www /var/www/htdocs
Create Let's Encrypt SSL Certificate
- Copy
/etc/examples/acme-client.conf
to /etc
Add the following lines at the bottom of the file:
domain webmail.example.com {
domain key "/etc/ssl/private/webmail.example.com.key"
domain full chain certificate "/etc/ssl/webmail.example.com.crt"
sign with letsencrypt
}
Configure httpd
- Create a DNS entry (either CNAME or A record) for subdomain
webmail.example.com
Edit /etc/httpd.conf
following the example below.
prefork 3
types { include "/usr/share/misc/mime.types" }
server "default" {
listen on egress port 80
root "/htdocs"
directory index index.html
location "/.well-known/acme-challenge/*" {
root "/acme"
request strip 2
}
}
Run the httpd syntax check.
httpd -n
Enable and start httpd.
rcctl enable httpd
rcctl start httpd
Request the Let's Encrypt certificate.
acme-client -v webmail.example.com
Add the server definitions for RainLoop to /etc/httpd.conf
server "webmail.example.com" {
listen on egress port 80
block return 302 "https://$SERVER_NAME$REQUEST_URI"
}
server "webmail.example.com" {
listen on egress tls port 443
root "/htdocs/rainloop"
directory index "index.php"
tcp { nodelay, backlog 10 }
tls {
certificate "/etc/ssl/webmail.example.com.crt"
key "/etc/ssl/private/webmail.example.com.key"
}
hsts {
max-age 31556952
preload
}
# Value below is 25MB in bytes. 1MB = 1048576 bytes
connection max request body 26214400
location "/data*" {
block return 403
}
location "*.php*" {
fastcgi socket "/run/php-fpm.sock"
}
}
Configure PHP to allow attachments up to 25 megabytes. Make the following changes in /etc/php-7.3.ini
:
; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 25M
...
; Maximum size of POST data that PHP will accept.
; Its value may be 0 to disable the limit. It is ignored if POST data reading
; is disabled through enable_post_data_reading.
; http://php.net/post-max-size
post_max_size = 29M
Enable the necessary PHP modules by copying their configuration files to /etc/php-7.3/
cp /etc/php-7.3.sample/* /etc/php-7.3/.
Check the syntax of /etc/httpd.conf
httpd -n
Enable and start httpd and php-fpm.
rcctl reload httpd
rcctl enable php73_fpm
rcctl start php73_fpm
Final Test
Browse to https://webmail.example.com/?admin
.
The default username is: admin
The default password is: 12345.
Browse to each of the configuration sections and make your desired changes. Once you have finished with the configuration, log into webmail at https://webmail.example.com